Home
About Us
Blog
Product
Solution
Contact Us
FDC Hydraulic Merchant
中
Product Center
Smart Crimping Machine Series
Hose Assembly Label Printing
Hose crimping machine
1.5-inch crimping machine
2-inch crimping machine
3-inch crimping machine
4-inch crimping machine
6-inch or larger crimping machine
Air suspension crimping machine
Nut closing machine
Hose Pressure Testing Machine
Flexible debonding machine
Suction-and-discharge pipe cutter
Hose Assembly and Pipe Fittings
High-pressure steel wire reinforced hose
Maximum hose size: 31 mm Maximum opening: 30 mm Total time for full opening and closing: 5 seconds Suitable for crimping high-precision components in industries such as aerospace, electronics, and automotive parts.
DX-60P Disc Compression Machine
Maximum hose specification: 32mm-4S to 51mm-3W Maximum opening: 126mm Total time for full opening and closing: 20 seconds Suitable for crimping steel-braided hoses in the automotive parts and machinery industries.
DX-95 Crimping Machine
The SDX-95 (formerly SDX-90) (dual-speed single-bevel model) crimping machine not only features a composite cylinder technology with independently owned intellectual property in its cylinder design, but also uses “SDX” to denote its mechanical structure. In the SDX series, during the crimping process: 1) The molds remain stationary front and back, enabling planar compression. As a result, the crimped parts are less likely to develop taper (commonly known as "big end, small end"). 2) The molds slide along rails without relying on spring support. Consequently, the crimped lines are uniform and do not become elliptical. 3) The machine has a wide opening, making it easy for products to pass through. 4) Mold changes are convenient and straightforward. 5) It is easier to precisely position special crimped products.
SDX-95 Crimping Machine
Maximum hose specification: 32mm-4s to 51mm-3w Maximum opening: 136mm Total time for full opening and closing: 20 seconds Suitable for crimping steel-braided hoses in the automotive parts and machinery industries.
SSX-95 Crimping Machine
Maximum hose size: 32mm-4s to 51mm-3w Maximum opening: 136mm Total time for full opening and closing: 10 seconds Suitable for crimping steel-braided hoses in the automotive parts and machinery industries.
SDX-90Z Crimping Machine
Maximum hose specification: 51mm-4s Maximum opening: 136mm Total time for full opening and closing: 10 seconds Suitable for one-step crimping of four-layer hydraulic hoses used in construction machinery. The cylinder structure adopts a composite cylinder technology with independent intellectual property rights. The "FX" designation refers to the mechanical structure (composite inclined surface). During crimping: 1) The molds remain stationary front and back, providing planar compression. As a result, the crimped product is less likely to develop tapering (commonly known as "big-end or small-end"). 2) The molds slide along a track without relying on spring support. Consequently, the crimped product has uniform lines and does not become elliptical. 3) The machine features a large opening, making it easy for products to pass through. 4) Mold changes are convenient. 5) Specialized products are easier to position accurately during crimping.
FX-95 Crimping Machine
Maximum hose specification: 6—51×4S Maximum opening: 134 mm Total time for full opening and closing cycle: 12 seconds Suitable for: Four-layer spiral-wound hoses used in construction machinery, auto parts, and the general mechanical industry—single-step crimping and forming The cylinder structure employs a composite cylinder technology with independently owned intellectual property rights. The "FX" designation refers to the mechanical structure (composite inclined surface). During crimping: 1) The mold remains stationary front and back, providing planar compression. As a result, the crimped product is less likely to develop taper (commonly known as "large or small end"). 2) The mold slides along a track without relying on spring support. Consequently, the crimped product exhibits uniform lines and avoids an elliptical shape. 3) The machine features a large opening, making it easy for products to pass through. 4) Mold changes are convenient, facilitated by a quick-change gun. 5) Specialized products are easier to position accurately during crimping.
FX-98 Crimping Machine
For specialized maintenance of construction machinery Maximum hose specification: 6–64×6S Maximum opening: 150mm Total time for full opening and closing: 12 seconds Suitable for: Construction machinery, auto parts, and the machinery industry Four-layer spiral-wound hose formed in one single crimping process
FX-120 Crimping Machine
Maximum hose specification: 64mm - 6S Maximum opening: 140mm Total time for full opening and closing: 14 seconds Suitable for high-pressure spiral hoses used in the coal mining and steel industries, as well as 6-layer steel wire hoses formed in a single crimping process.
SX-100 Crimping Machine
Six-layer steel wire for coal mines
SX-120 Crimping Machine
For 4-inch industrial pipes only
FX-140 Crimping Machine
Maximum hose specification: 153mm-4s Maximum opening: 280mm Total time for full opening and closing: 13 seconds Suitable for: air shock absorbers, cement conveying hoses, large-diameter flanged oil pipelines, and crimping of special-shaped products.
FX-160 Crimping Machine
6-inch industrial pipe dedicated
BSX-150 Crimping Machine
Maximum hose specification: 204 mm Maximum opening: 310 mm Total time for full opening and closing: 15 seconds Suitable for: air shock absorbers, cement conveying hoses, large-diameter flanged oil pipelines, and crimping of special-shaped pipe fittings.
FX-180 Crimping Machine
Fully Automatic Intelligent CNC Maximum hose specification: 6–51×4S Maximum opening: 136 mm Total cycle time for opening and closing: 10 seconds Suitable for: Construction machinery, auto parts, and the general mechanical industry Four-layer spiral-wound hoses formed in a single crimping process
RFX95 Smart Crimping Machine
